Download latest Android 4.4 Kitkat stock firmware for Cube Talk 8X tablet from here or from here. Download another Cube firmware from here.
Archive name: TALK8X_V1.00_20150110
Image: KBT_ES8068_01A_V1.5_20141208_BOE屏_U27GT-C8
Archive file size: 446 MB
Project: esky92_tb_cn_kk
Platform: Mediatek MT6592Image: KBT_ES8068_01A_V1.5_20141208_BOE屏_U27GT-C8
Archive file size: 446 MB
Project: esky92_tb_cn_kk
Config_version: V1.1.2
Installing the ROM
1. Run flash tool “the Flash_tool.exe”
2. Choose “Scatter” file.
3. At this point, you need to remove the battery from your device and connect the device to a USB 2.0 port on your PC (USB 3.0 is not supported). You should start hearing the “dings” in Windows to signify that it detects your device.
4. Click the Download button on the Flash Tool.
5. If your device is connected properly, you will see the percentage bar change colors and start running. The one to watch is the yellow bar that goes from 0-100% indicating that the ROM is being flashed.
6. You will then get a window with a green circle, indicating that the flash is complete.
7. When the flashing process is done, disconnect the USB cable and replace the battery in your device and turn on the device. Your device will then boot into the newly installed ROM.
3. At this point, you need to remove the battery from your device and connect the device to a USB 2.0 port on your PC (USB 3.0 is not supported). You should start hearing the “dings” in Windows to signify that it detects your device.
4. Click the Download button on the Flash Tool.
5. If your device is connected properly, you will see the percentage bar change colors and start running. The one to watch is the yellow bar that goes from 0-100% indicating that the ROM is being flashed.
6. You will then get a window with a green circle, indicating that the flash is complete.
7. When the flashing process is done, disconnect the USB cable and replace the battery in your device and turn on the device. Your device will then boot into the newly installed ROM.
